Meguiar’s Mirror Glaze Medium Cut Cleaner M0116, 1 Pint

Meguiar’s Medium Cut Polisher


Meguiar’s Polishing Kit


Meguiar’s Medium Cut Cleaner M0116 is a medium/moderate cutting, low swirl compound formulated with body shop professionals in mind to removing moderate defects like scratches, acid rain, severe swirls and holograms, and up to 1200-2000 grit sanding marks. Medium Cut Compound has been in high solids production shops and it powers through defects while being a low-dusting, low splatter, and body shop safe formula. This pro-grade auto body compound is safe and effective on all glossy paints including aftermarket, OEM, clear coats, lacquers, and enamels. Formulated specifically for use with a rotary buffer and is available in 1 pint size containers. 


PLEASE NOTE: This information is provided in good faith and correct to the best of our knowledge. No warranty, guarantee, or representation is made as to the sufficiency of the information for the safe use of the product, nor to relieve the end user of any Federal, State, or Local regulatory responsibility.

Additional Meguiar’s Medium Cut Polishing Info


After removing the moderate paint defects with Meguiar’s Mirror Glaze Medium Cut Cleaner M0116, you typically need to follow with a polishing compound and pad, like Meguiar’s Dual Action Cleaner/Polish.

Meguiar’s Medium Cut Polishing Directions

Step 1:

Shake the product well. 


Step 2:

For use with a rotary buffer.



Make sure the surface you are working with is cool to the touch. This product should not be used on warm or hot surfaces. 


Step 4:

Set the rotary buffer to between 1000-1500 RPM’s and work one section at a time. 


Step 5:

When working on uncured paint, apply the compound directly to the buffing pad.


Step 6:

Begin working on a 2” x 2” area with overlapping passes, and continue to work the buffer until a light film remains on your surface.


Step 7:

Wipe off the residue before the product dries with a fresh, clean microfiber towel. 



  1. Charlie Norris

    “I love fiberglass coatings. They have great products and excellent advice. I'm trying to open a boat repair shop in St . Mary's, GA and my supply WILL come from fiberglass coatings. When I lived in the Fl. Keys for 36 years and worked for a towing and salvage Co for 15 years all our supplies came from Fiberglass coatings. Great service and never were disappointed. Keep up the great job everyone.”
  2. Brian Lewis

    “The staff are very knowledgeable and friendly Have always gotten the right stuff for the right job. Pat,mark,Colby,Ryan your the best. Pat is the walking encyclopedia of FGCI.”
  3. Justin Lammers

    “Been working on a skiff project and using all FGCI products. They came highly recommended by my friends who are boat builders. It is the highest quality resins, glass, and gelcoat for the money. They made it really easy for a newer person to boat building. The customer service is phenomenal and they are always knowledgeable and ready to help with any questions I had.”
Be the first to review “Meguiar’s Mirror Glaze Medium Cut Cleaner M0116, 1 Pint”

Your email address will not be published. Required fields are marked *