"*" indicates required fields
Trowel-On Epoxy Fairing Putty
Epoxy Fairing Putty
Our Trowel On Epoxy Fairing Putty makes it easy to mix and fill up to 1″ gaps, with no issue with vertical sag, and adheres to almost any substrate! Trowel and effortlessly sand to a smooth finish! Perfect for a multitude of applications like:
- Composite
- Industrial
- DIY at home projects
*For Drum Quantities – please contact us via our Contact Us page.
$179.99
Epoxy Fairing Putty
FGCI’s Trowel-On Epoxy Fairing Putty adheres easily to wood, concrete, fiberglass, polyester and more! Perfect filler for applications within the composites, masonry, art, architecture, and steel industries. This product provides a phenomenally smooth surface for topcoats and can be pigmented. Abrasion and impact resistant.
PLEASE NOTE: This information is provided in good faith and correct to the best of our knowledge. No warranty, guarantee, or representation is made as to the sufficiency of the information for the safe use of the product, nor to relieve the end user of any Federal, State, or Local regulatory responsibility.
NOTE: The most important aspect of this product is proper surface preparation. Properly preparing the surface can be the difference between a solid bond and a weak bond. Proper surface prep can include degreasers, steam cleaning, solvent washing, sandblasting, grinding or priming. Once prepared, ensure the surface is clean and dry.
- Step 1: Mix 2 parts A-side to 1 part B-side by volume (it’s 100:45 by weight).
- Step 2: Use a putty knife to mix the two parts for 3 minutes, carefully folding the thick paste to ensure it is completely mixed.
- Step 3: Use a putty knife or trowel to apply the paste onto the desired surface. For vertical and overhead surfaces, ensure a thicker coating has been applied for the paste to harden.
*The product has a gel time of approximately 20-30 minutes with a 1/2 pound mass in 77 degrees and cures to a hard plastic in 12-20 hours.
Charlie Norris
Brian Lewis
Justin Lammers