"*" indicates required fields
Meguiar’s Diamond Cut Polisher, M-8532 – Super Fast Cutting
Meguiar’s Super Fast Cutting Polisher
$29.99 – $69.99
Meguiar’s Super Fast Cut Polishers
Meguiar’s M85 Mirror Glaze Diamond Cut Compound 2.0 is a super-fast cutting, low swirl compound formulated with body shop professionals in mind for removing heavy defects like scratches, acid rain, severe swirls and holograms, and up to 1200 grit sanding marks. Diamond Cut Compound has been in high solids production shops and it powers through defects while being a low-dusting, low splatter, and body shop safe formula. This pro-grade auto body compound is safe and effective on all glossy paints including aftermarket, OEM, clear coats, lacquers, and enamels. Formulated specifically for use with a rotary buffer and is available in 32 ounce and 1 gallon size containers.
PLEASE NOTE: This information is provided in good faith and correct to the best of our knowledge. No warranty, guarantee, or representation is made as to the sufficiency of the information for the safe use of the product, nor to relieve the end user of any Federal, State, or Local regulatory responsibility.
Additional Meguiar’s Super Fast Cut Polishing Info
After removing the heavier paint defects with M85 Diamond Cut Compound 2.0, you typically need to follow with a less aggressive compound and pad.
Super Fast Cut Polishing Directions
Shake product well.
For use with a rotary buffer.
Make sure the surface you are working with is cool to the touch. This product should not be used on warm or hot surfaces.
Set the rotary buffer to between 1000-1500 RPM’s and work one section at a time.
When working on uncured paint, apply the compound directly to the buffing pad.
Begin working on a 2” x 2” area with overlapping passes, and continue to work the buffer until a light film remains on your surface.
Wipe off the residue before the product dries with a fresh, clean microfiber towel.
There are no reviews yet.