S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
1 - 10 of 10
View:
 
Description
Price
Quantity
A low-porosity, highbuilding, fairing and shaping primer for composites, wood, MDF, GRP, foam, plaster and clay Usage For fairing and shaping composite plugs, patterns and models and a variety of other substrates. Used by manufacturers in the automotive, housing, leisure products, marine and transportation industries.

Features:

You'll save time and labor and add quality with Duratec Polyester Base Primer. Here's why you should choose Duratec Polyester Base Primer-- Easy to apply -- apply with a sprayer, brush or roller. Rapid coat buildup--builds quickly--between 1 to 3 mm, 40-120 mils, maximum weton-wet application with minimum sag on vertical surfaces. Quick Shaping--quickly shaped by knife, file or sandpaper. Fast air curing--saves time. The primer quickly air cures to an easily sandable surface, which provides a stable base for other coatings. High heat distortion temperature--reduces the risk of post-cure or distortion from elevated temperature due to exotherm and consequential print-through of substrates.

Item#:
126102
 
Ground Shipping Only
100.05
Each
A high quality polyester sanding primer that provides outstanding filling and leveling properties for many varied substrates.

Usage For composites, metal, MDF, brick, concrete, various lowdensity foams, plaster and clay.

Features:

Here's why you should choose Duratec Polyester Sanding Primer: Low porosity--provides a super fine leveling and filling system on a variety of substrates with superior release properties. Adhesion to most epoxies -- with heat distortion level of 201°F, 94°C, the primer also adheres to fiberglass, properly prepared metal, wood, MDF, brick, concrete and polyurethane foam. Rapid coat buildup--to 40 mils, 1000 microns, wet on wet, on composite plug and master mold surfaces; saves time and labor cost. Easy sanding--saves time and effort. An exceptional primer for topcoating with Duratec Surfacing Primers and HiGloss Coatings, lacquers and polyurethane paints.

Item#:
126105
 
Ground Shipping Only
115.12
Each
 An exceptionally easy to-sand primer, that can be polished to a smooth, porosity-free surface. Uses: for surfacing patterns for composite molds, and where an easy sanding, high build primer is required.. Apply over tooling board, MDF, brick, concrete, plaster and clay. Features: Builds rapidly and provides a surface that sands quickly. • Use less sandpaper • Reduce sanding labor Easy to spray from HVLP guns. Low porosity, fine smooth surface. • Start sanding with a fine grit, reduce dust and film loss. • Build up to 30 mils.
Item#:
126106
 
Ground Shipping Only
121.64
Each
 The ultimate High-Gloss surface primer for wood, MDF, tooling board and composite plugs, patterns and models. Unique air-cure technology for fast cure even with thin coats. Easy to sand, polish to a gloss. Take a mold directly off the Surface Primer or topcoat for the highest gloss.

Recommended Uses:

• Surface coat for plugs/ patterns for composite tooling.

• Easy Sanding High-Build Primer for composite parts.

• High Build, Fast Sanding Primer perfectly smooth surfaces

• A substitute for sanding gelcoat -epoxy laminates or pinhole-free surfaces.

• Highly crosslinked coating providing excellent chemical resistance Features: Low Porosity- provides a super fine leveling and filling system. Applied properly, Surface Primer provides a porosity-free surface without pinholes or defects. Adhesion to most epoxies- with heat distortion level of 200° F/93 C the primer also adheres to fiberglass, wood, MDF, brick, concrete and polyurethane foam. Rapid Buildup- up to 40 mils 1000 microns, wet on wet, on composite plugs and master mold surfaces. Save time and labor. Easy Sanding-also saves time and labor. The primer cures to a surface that polishes to a gloss.

Item#:
126107
 
Ground Shipping Only
49.77
Each
The ultimate High-Gloss surface primer for wood, MDF, tooling board and composite plugs, patterns and models. Unique air-cure technology for fast cure even with thin coats. Easy to sand, polish to a gloss. Take a mold directly off the Surface Primer or topcoat for the highest gloss.

Recommended Uses:

• Surface coat for plugs/ patterns for composite tooling.

• Easy Sanding High-Build Primer for composite parts.

• High Build, Fast Sanding Primer perfectly smooth surfaces

• A substitute for sanding gelcoat -epoxy laminates or pinhole-free surfaces.

• Highly crosslinked coating providing excellent chemical resistance Features: Low Porosity- provides a super fine leveling and filling system. Applied properly, Surface Primer provides a porosity-free surface without pinholes or defects. Adhesion to most epoxies- with heat distortion level of 200° F/93 C the primer also adheres to fiberglass, wood, MDF, brick, concrete and polyurethane foam. Rapid Buildup- up to 40 mils 1000 microns, wet on wet, on composite plugs and master mold surfaces. Save time and labor. Easy Sanding-also saves time and labor. The primer cures to a surface that polishes to a gloss.

Item#:
126108
 
Ground Shipping Only
121.28
Each
 The ultimate High-Gloss surface primer for wood, MDF, tooling board and composite plugs, patterns and models. Unique air-cure technology for fast cure even with thin coats. Easy to sand, polish to a gloss.  Take a mold directly off the Surface Primer or topcoat for the highest gloss.

Recommended Uses:

• Surface coat for plugs/ patterns for composite tooling.

• Easy Sanding High-Build Primer for composite parts.

• High Build, Fast Sanding Primer perfectly smooth surfaces

 • A substitute for sanding gelcoat -epoxy laminates or pinhole-free surfaces.

• Highly crosslinked coating providing excellent chemical resistance Features: Low Porosity- provides a super fine leveling and filling system. Applied properly, Surface Primer provides a porosity-free surface without pinholes or defects. Adhesion to most epoxies- with heat distortion level of 200° F/93 C the primer also adheres to fiberglass, wood, MDF, brick, concrete and polyurethane foam. Rapid Buildup- up to 40 mils 1000 micorns, wet on wet, on composite plugs and master mold surfaces. Save time and labor. Easy Sanding-also saves time and labor. The primer cures to a surface that polishes to a gloss.

Item#:
126109
 
Ground Shipping Only
119.31
Each
A high quality primer for composite marine surfaces an integral part of the Duratec Marine System. Usage For one-off and production composite yacht priming and osmosis and blister repairs. Formulated for below waterline, topside and deck applications. For parttern surfacing and mold surfacing.

Features: Build in protection, add quality and save time with Duratec Vinyl Ester Primer. Here’s why you should choose Duratec Vinyl Ester PrimerApplication Easily applied with sprayer, roller or brush. Saves time and labor. High Build—to 40 mils, 1000 microns, wet on wet, without sagging on vertical surfaces. Quick Cure—Catalyze with MEKP Catalyst. Rapid curing; far faster than epoxy resin systems. Primer will be ready to sand in 1-4 hours, depending on thickness and temperature. Osmosis and Blister Resistance Proven performance on more than 2000 boats and yachts over a seven-year period. Heat resistance up to 280º F. Strength: Vinyl Ester Primer forms a strong film, resisting cracking.

Item#:
126111
 
Ground Shipping Only
166.19
Each
 Duratec Vinyl Ester Primer is used for composite yacht priming and to provide protection against blistering and osmosis damage.

Important: If the surface to be coated is epoxy laminate— 

• Always test the compatibility between the epoxy surface and Duratec products. 

• Do not apply Duratec Vinyl Ester products over epoxy putties that contain microballoons. 

• If the surface is epoxy resin or laminate, scrub with an abrasive pad and water to eliminate any possible amine blush that may be exposed due to sanding and might interfere with the adhesion of Duratec products to the epoxy substrate. Here’s how to apply Duratec Vinyl Ester Primer: 1. When Duratec Vinyl Ester Primer is applied over Duratec Vinyl Ester Fairing Putty or Duratec Vinyl Ester Fairing Primer, follow instructions outlined above. Otherwise, sand or sandblast the surface to a 80- or 120- grit finish and wipe with a fast solvent and clean white cloth. Do not use a tack rag. 2. Thoroughly stir Duratec Vinyl Ester Primer in the can. Catalyze at 2 percent with full strength mekP catalyst (20cc/quart) for an 18-20 minute pot life. If ambient temperatures are excessive, cool the primer to 77°F, 25°C to create a longer pot life. Thin, if necessary, 10-20 percent with Duratec Thinner or mek solvent after catalyzation. 

Important: 

• For proper blister/osmosis resistance, Duratec Vinyl Ester Primer must have a minimum of 0.5 mm, 20 mils, dry thickness remaining after sanding before topcoating. If the primer is used for cosmetic applications above the waterline, no minimum thickness is required. 

• After sanding, allow the primer to cure overnight at 77°F, 25°C before topcoating. This allows for the release of solvents that may be trapped at the surface. Spray Application: 3. Gravity, siphon or pressure-pot spray systems can be used. Line air pressure should be between 35-50psi and pot pressure should be 12-15psi. A 1.5- 2.5mm diameter air-cap, needle and nozzle arrangement is recommended. (Plural-component spray equipment —airless, air-assist and/or air-aspirated.
Item#:
126114
 
Ground Shipping Only
162.01
Each
 An exceptionally easy to-sand primer, that can be polished to a smooth, porosity-free surface. Uses: for surfacing patterns for composite molds, and where an easy sanding, high build primer is required.. Apply over tooling board, MDF, brick, concrete, plaster and clay. Features: Builds rapidly and provides a surface that sands quickly. • Use less sandpaper • Reduce sanding labor Easy to spray from HVLP guns. Low porosity, fine smooth surface. • Start sanding with a fine grit, reduce dust and film loss. • Build up to 30 mils.
Item#:
133262
 
Ground Shipping Only
62.40
Each
 Duratec StyroShield Primer is an air-cure polyester primer that can be applied directly to polystyrene foam (Styrofoam™). When cured, StyroShield forms a barrier that allows the use of conventional polyester laminating resins, tooling putty, or other Duratec products. Duratec StyroShield Primer is the right choice for— Making patterns from low -cost polystyrene foam Making prototype molds, or mold-direct construction Anchoring decorative paints onto polystyrene foam Sealing forms for cast concrete Sealing architectural fixtures In addition, StyroShield — Contains microspheres, which provides insulation for polystyrene foam Allows polystyrene foam to be substituted for urethane foam
Item#:
134507
 
Ground Shipping Only
203.37
Each
1 - 10 of 10
View: