Meguiars Dual Action Cleaner/Polish, 1 Gallon. Moderate to Low Abrasive Power

Meguiars Dual Action Cleaner/Polish

$49.99

Meguiar’s Polishers

 

If you need to remove light to medium swirls, scratches, oxidation, etchings, water spots and other paint blemishes, Meguiar’s Mirror Glaze M83 Dual Action Cleaner Polish is the perfect solution. This professional grade cleaner buffered abrasives that clean to remove defects without marring the finish like a traditional compound. Specialized cleaners are combined with pure, rich polishing oils to leave paint with a deep, glossy shine after use. This body shop safe formula can be applied by hand, dual action polisher, like Meguiar’s MT300 DA Polisher, or Rotary Buffer. If used by Rotary, and fine swirls are left behind, follow up with a less aggressive cleaner like Meguiar’s Mirror Glaze M09 Swirl Remover 2.0 to further refine the paint. 

 

PLEASE NOTE: This information is provided in good faith and correct to the best of our knowledge. No warranty, guarantee, or representation is made as to the sufficiency of the information for the safe use of the product, nor to relieve the end user of any Federal, State, or Local regulatory responsibility.

Additional Meguiar’s Polishing Info

 

After removing the low paint defects with Meguiars Dual Action Cleaner/Polish, you typically need to follow with a polishing compound and polishing disc, like Meguiars Swirl Free Polish M8232. Eliminates swirl marks fast..

Meguiar’s Polishing Directions

Step 1:

Shake product well. 

 

Step 2:

For use with a rotary buffer.

 

Step3:

Make sure the surface you are working with is cool to the touch. This product should not be used on warm or hot surfaces. 

 

Step 4:

By HAND: Apply with a soft foam wax applicator to a small section (about 1-2 square foot area) with light to moderate pressure for 1-2 minutes. Wipe off before it dries with a premium microfiber towel

 

Step 5:

By DA POLISHER: Apply to a section at a time, using a Meguiar’s Soft Buff Foam Cutting Disc at about 4800-5800 OPM’s. Work product until nearly dry and wipe off excess with a premium microfiber towel. Repeat as needed working in sections.

 

Step 6:

By ROTARY BUFFER: Be sure you are familiar with proper use of a rotary buffer. Apply to one section at a time, using a Meguiar’s 7” Soft Buff Rotary Cutting Pad at approximately 1200-1800 RPM’s. Work product until nearly dry and wipe off excess with a premium microfiber towel. Repeat as needed working in sections.

 

Step 7:

Wipe off the residue before the product dries with a fresh, clean microfiber towel. 

 

Reviews

  1. Charlie Norris

    “I love fiberglass coatings. They have great products and excellent advice. I'm trying to open a boat repair shop in St . Mary's, GA and my supply WILL come from fiberglass coatings. When I lived in the Fl. Keys for 36 years and worked for a towing and salvage Co for 15 years all our supplies came from Fiberglass coatings. Great service and never were disappointed. Keep up the great job everyone.”
  2. Brian Lewis

    “The staff are very knowledgeable and friendly Have always gotten the right stuff for the right job. Pat,mark,Colby,Ryan your the best. Pat is the walking encyclopedia of FGCI.”
  3. Justin Lammers

    “Been working on a skiff project and using all FGCI products. They came highly recommended by my friends who are boat builders. It is the highest quality resins, glass, and gelcoat for the money. They made it really easy for a newer person to boat building. The customer service is phenomenal and they are always knowledgeable and ready to help with any questions I had.”
Be the first to review “Meguiars Dual Action Cleaner/Polish, 1 Gallon. Moderate to Low Abrasive Power”

Your email address will not be published. Required fields are marked *