S2K Commerce - Products Dropdown


S2K Commerce - Shopping Cart


S2K Commerce - Order Entry

Home  >  Resins, Polyester & Vinylester & Epoxy  > Non-Corrosive Epoxy, Curing Agent, 3:1 Ratio, EA-683B, 1/2 Gallon

Non-Corrosive Epoxy, Curing Agent, 3:1 Ratio, EA-683B, 1/2 Gallon

Item #:125242 
FGCI, Non Corrosive Activator, Part B, 100% Solids, 3:1, Mix well and do not vary ratio. Activators with lower ratios give Flex & Work Time; Higher Ratios give Hardness & Chem. Resistance, Pot Life @ 77F & .5 lb Mass: 15-20 Min., 1/2 GL
Quantity Price
1.0 54.11
 Our 3 to 1 Epoxy Activator forms an easy to use 2 component 100 % solids epoxy system when mixed with either of our available epoxy resins in a ratio of three parts Resin ( A side ) to one part Activator (B side ) by volume. It Is significantly faster setting then our 2 to 1 system with improved chemical and solvent resistance and generally improved physical properties. When mixed with our Standard Epoxy Resin it forms a thicker high viscosity system more suited to adhesive bonding and casting applications as it will generally form a tougher stronger plastic with better adhesion and very good resistance to hydrocarbon fuels and ethanol. When used with our Laminating Epoxy Resin it will form a thinner liquid more appropriate for wetting out fiberglass and other reinforcements it will have a slightly longer Gel Time and form a plastic with more flexibility, slightly less solvent resistance and lower HDT. Both systems cure to a tough, hard, blush free, amber colored plastic, with good physical properties, chemical and solvent resistance, excellent resistance to water and good adhesion to wood, glass, metals, and most other plastics.

As with all adhesive compounds bonding surfaces should be clean and free dirt or grease.

Resins, Polyester & Vinylester & Epoxy

1/2 gallon